All About Daily Baltimore News

Woodworking Tips And Tricks For Novices And Experts

Jul 15

Woodworking Tips And Tricks For Novices And Experts

When you are looking for a new hobby, look no further than woodworking. This amazing pastime combines skill building with the creation of items you can actually use around your home. If you want a hobby that allows you to do something good, the tips below will help you join in.

More Information

 

 

Stair gauges can be used for crosscut guides. Clamp them to the carpenter's square, then ensure that they match up with the jack's run and rise. Mark the notches in them. If you place them on the tongue you're using for your carpenter square, that combo is a good crosscut guide for your circular saw.

 

Using a good wood glue can make joined pieces even stronger than the wood itself. The key to strength in a glued joint is the amount of time the glue takes to set. Glue that takes longer to cure is better than quick setting glue. Slower setting glue has more time to penetrate into the fibers of the wood, which enhances the strength of the joint.

 

Before using any new tool, do your research on it in full. New tools can mean serious injuries for those that use them incorrectly. Even if you're pretty sure of how to use it, don't risk it. Study up via the web and books related to the tool in question.

 

You should know how to work with wood while using hand tools as well as power tools. If you are doing one quick action, it may be in your best interest to use a hand tool, but if you are completing a larger task, power tools will save you a lot of time.

 

Wood is an expensive material to work with. It becomes really expensive when you are working on larger projects. Save some money by using cheaper and less attractive woods for areas of the project that are not on display. Save the high quality wood for the structure, tops and front of the project.

 

Go to the art supply store and get a drafting square. Carpenter squares are a hassle, and drywall squares are notoriously inaccurate. When you need an exact square several feet in width and length, a drafting square is a surefire winner. Once you use it a few times, you'll likely use it just as much as a tape measure.

 

Stain only provides color to wood, not finish. You will need to apply a finish coat on top of the stained wood. If you are in a hurry, or short on time, you can use a product that combines both stain and finish together. Be sure to use a higher-quality brush for this, and stain in the direction of the grain.

 

These ideas aren't all new, yet they're all worth reading. Those which are new to you will serve to better your techniques. Those which are old hat are reminders that you should continually pay attention to how you are working with wood. Together, they will build you into a master wood craftsman.